ZTE Corporation BS8800C200 Manuale Utente
Chapter 6 Installing Cable
Note:
Make sure some cables left while cutting.
2. Install the protective ground cable to the PE binding post on
the equipment top, as shown in
.
F
IGURE
31 G
ROUND
C
ABLE
I
NSTALLATION
E
ND OF STEPS
.
Installing Data Cable
Prerequisite
Install the BBU and the FS board completely.
Context
Due to a high—integration design for the BBU, interfaces on the
panel are limited. Adopt a data cable for transfer, for it is conve-
nient for access of the internal/external environment monitoring,
dry contact monitoring and E1/T1 (Abis interface). There is one
interface to connect the SA module at End A of data cable. There
are multiple tri-interface at End B, connecting the internal/exter-
nal environment monitoring, dry contact monitoring and E1/T1.
panel are limited. Adopt a data cable for transfer, for it is conve-
nient for access of the internal/external environment monitoring,
dry contact monitoring and E1/T1 (Abis interface). There is one
interface to connect the SA module at End A of data cable. There
are multiple tri-interface at End B, connecting the internal/exter-
nal environment monitoring, dry contact monitoring and E1/T1.
The exploded view of data cable is as shown in
.
Confidential and Proprietary Information of ZTE CORPORATION
47