ZTE Corporation R8964S26H Manuale Utente
Chapter 4 Product Description
4.3.4 Antenna Jumper Cable
Antenna jumper cable is used to connect ZXSDR R8964 and the main feeder, the main
feeder and the antenna. When the main feeder uses 7/8" or 5/4" coax cable, an antenna
jumper cable is used to transit.
The appearance of the antenna jumper cable is shown in
.
Figure 4-7 Appearance of Antenna Jumper Cable
Note:
The length of the jumper cable is decided according to the on-site situation.
4.3.5 AISG Cable
is used to control the electrical-adjustment antenna.
shows the structure
of AISG cable.
Figure 4-8 AISG Cable
describes the meaning of sequence number of AISG cable.
Table 4-2 Meaning of Sequence Number of AISG Control Cable
Pins at end A
Pins at End B
Name
Meaning
PIN3
PIN1
RS485B_AISG
RS485-
PIN5
PIN2
RS485A_AISG
RS485+
PIN6
PIN3, PIN4
DC_AISG
DC power
4-5
SJ-20110921170448-002|2013-09-12(R1.0)
ZTE Proprietary and Confidential