ZTE Corporation ZTEC88 Manuale Utente

Removing the Battery

If you need to remove your phone’s battery, please follow the procedure indicated below:

1.

Slide the back cover toward the bottom of the phone and lift off the back cover.

2.

Insert your fingernail into the finger grip the slot on the bottom of the battery.  Lift the bottom of the battery away

from the handset.

3.

Remove the battery from the battery compartment.

Powering On/Off your Phone

To power on the phone, press and hold the End key for a  while.  If the handset lock code has been activated, the

phone will prompt to enter the code.  The default password is 1234.

To power off the phone, press and hold the End key for a while from the idle screen.

Warning:  Do not power the phone on when wireless phone use is prohibited, or when it may cause interference

or danger.

By setting the handset lock code, you can protect your phone against unauthorized use.  To unlock the phone, enter

the handset lock code and then press the OK key.

Connecting to the Network

After your phone is unlocked, it will automatically search for the network.

Activating Your Phone

Before placing a call with your new phone, you must activate the phone on the network.  To activate the phone, dial

provisioning number from the idle screen and follow the step-by-step instructions.  Once the display indicates that

programming is successful, the handset will restart automatically.  You may then place a call with your handset.

Set up Your Phone