ZTE Corporation ZTEMC2261 Manuale Utente
All Rights reserved, No Spreading abroad without
Permission
24
MC2261
Hardware Development Guide of Module Product
5. RF
I
NTERFACE
5.1. O
VERVIEW
A 50 ohm coaxial RF connector is provided for Module testing. However, we advise customers lead from the antenna pad at
the RF line to the antenna.
Figure 5–1 CDMA Connector
Another 50 ohm coaxial RF connector on daughter board is provided for Module testing and customer showing.
Figure 5–2 CDMA Connector on daughter board
The integrator must provide a suitable antenna that works in the desired frequency band of operation. The Antenna connected
to the CDMA connector should be a dual band antenna supporting the US PCS and Cellular bands.