ZTE Corporation ZXA10F660 Manuale Utente
Chapter 8
FAQ
Table of Contents
8.1 FAQ
How Can I set TCP/IP on the Computer Connected to the Device?
The default device
IP
address is 192.168.1.1. Therefore, set the computer IP address
to 192.168.1.2 – 192.168.1.254 and the subnet mask to 255.255.255.0.
How Can I Ensure That My Computer Is Successfully Connected to the Device?
On the command line interface, carry out the ping 192.168.1.1 command. If the connection
fails, the interface prompts connection timeout.
How Can I Set the Device Through the Web Interface?
Make sure that the computer is connected to the device. Then open the Internet Explorer
and enter http://192.168.1.1 on the address bar to access the Web interface of the
device. The default user name and password are admin.
How Can I Restore the Device to the Factory Default Settings?
Press the RST reset button for more than 10 seconds to reboot the device. Then the
device is restored to the factory default settings.
Why Is the PON Link Indicator Always OFF?
If the
PON
link indicator is always OFF, it indicates that the PON link is not successfully set
up. Make sure that the fiber is correctly connected with the PON port and the subscriber
device. Make sure that the tail fiber is straight and is in good condition.
Why Does the Device Fail to Make a Call?
Check whether the telephone cable is correctly connected to the POTS1 or POTS2 port.
Then access the Web interface of the device. Click the Application tab to check the
VoIP
configuration. If the VoIP configuration is correct and the telephone cable is correctly
connected, but the call still cannot be made, contact the service provider.
8-1
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential