ZTE Corporation ZXHNF660 Manuale Utente
Chapter 4 Network Configuration
2.
From the Choose SSID drop-down list, select an SSID.
a. In Authentication Type, select Open System, and then enable WEP Encryption
(by default, it is disabled).
The Open System configuration information is
displayed, as shown in
.
Figure 4-8 Open System Configuration
lists the parameters for the Open System authentication mode.
Table 4-6 Parameters for Open System Authentication Mode
Parameter
Description
Choose SSID
Current SSID
Authentication Type
Current SSID authentication mode
WEP Encryption
To enable or disable
WEP
encryption
WEP Encryption
Level
WEP encryption length
l
The 128–bit encryption can be a 13–bit ASCII codes or a 26–bit
hexadecimal number.
l
The 64–bit encryption can be a 5–bit ASCII code or a 10–bit
hexadecimal number.
Generally, the 64–bit encryption can meet the user requirements. To
enhance security, use the 128–bit encryption.
WEP Key Index
Current encryption value
WEP Key1
WEP encryption value
Range: 5–bit ASCII code or 10–bit hexadecimal number
WEP Key2
WEP encryption value
Range: 5–bit ASCII code or 10–bit hexadecimal number
4-9
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential