ZTE Corporation ZXHNF660 Manuale Utente
ZXA10 F660 User Manual
Figure 6-26 Ingress Rate Limit Configuration
lists the parameters for ingress rate limit configuration.
Table 6-10 Parameters for Ingress Rate Limit Configuration
Parameter
Description
Visiting Interface
User interface for the rate limit rule
Enable
To enable the ingress rate limit function
Rate
Limit rate
8000 bps – 104857600 bps
3.
Click Add to finish the configuration. Click Modify to modify the configuration. Click
Delete to delete the configuration.
– End of Steps –
Result
The QoS ingress rate limit is configured.
6.6 Configuring SNTP Client
Short Description
Perform this procedure to configure the SNTP client.
Prerequisites
The user has logged in to the Web interface of the device.
6-26
SJ-20110718111034-001|2011-07-18 (R1.0)
ZTE Proprietary and Confidential