ZTE Corporation ZXHNH168M Manuale Utente

Configure TCP/IP

Choose [Start→Control Panel] from the Windows task bar to open the Control Panel page.

ii.

Double click Network Connections.

iii.

Right click Local Connections, and click Properties to open the Local Connection Prop-

erty page.

iv.

Double click Internet Protocol (TCP/IP), and then click Properties to open the Internet

Protocol (TCP/IP) Properties page.

Select Use the following IP address, and set the local IP address to the same network

segment as the LAN port address of the device. For example, 192.168.200.7, subnet mask

255.255.255.0, and default gateway 192.168.200.1.

vi.

Click OK to confirm and save the settings.

Note:

These settings can be changed according to user's network requirements. However, please

use the preceding settings when accessing the Web configuration page of the device for the

first time.

Check settings

Users can check the network connection status between the computer and the device with the

Ping command.

If the device cannot be pinged, check the following items one by one:

a) Whether the Ethernet cable between the device and the computer is connected correctly.

b) Whether the network adapter driver is correctly installed on the computer.

Whether the corresponding indicator at the device LAN port and the network card connection

indicator on the computer are on.

d) Whether TCP/IP is correctly configured on the computer.