ZTE Corporation ZXMBW-R9100 Manuale Utente
Chapter 2 Hardware Description
F
IGURE
10 G
ROUNDING
C
ABLE
S
TRUCTURE
Optical Fiber
Optical Fiber
Structure
shows the optical fiber structure used in ZXMBW R9100.
F
IGURE
11 ZXMBW R9100 O
PTICAL
F
IBER
S
TRUCTURE
Description
The following describes some of the key points related to the phys-
ical structure of the fiber cable.
ical structure of the fiber cable.
�
The cable is a single mode fiber with LC/PC - DLC/PC connector.
�
The sheath usually is black. The two core wires are yellow and
blue.
blue.
�
The sheath diameter is 7mm.
RF Jumper Cable
RF jumper cable is used to transfer signals between ZXMBW
R9100cabinet and antenna, between ZXMBW R9100cabinet and
main feeder cable, and between main feeder cable and antenna.
The length of the RF jumper cable is determined according to the
actual situation.
R9100cabinet and antenna, between ZXMBW R9100cabinet and
main feeder cable, and between main feeder cable and antenna.
The length of the RF jumper cable is determined according to the
actual situation.
When the distance between antenna and ZXMBW R9100cabinet is
less and the adopted feeder cable is of 1/2 in. then, the jumper ca-
ble is not used, rather ZXMBW R9100cabinet is directly connected
with the feeder cable and feeder cable is connected to the antenna.
If the adopted feeder cable is of 7/8 in. or 5/4 in. then jumper is
used.
less and the adopted feeder cable is of 1/2 in. then, the jumper ca-
ble is not used, rather ZXMBW R9100cabinet is directly connected
with the feeder cable and feeder cable is connected to the antenna.
If the adopted feeder cable is of 7/8 in. or 5/4 in. then jumper is
used.
shows the RF jumper cable.
Confidential and Proprietary Information of ZTE CORPORATION
21