ZTE Corporation ZXMBW-RA25 Manuale Utente
Chapter 6 Main Antenna Feeder System Installation
Confidential and Proprietary Information of ZTE CORPORATION 65
according to the feeder connector assembly instructions, and
connect the jumpers between the feeder and chassis.
connect the jumpers between the feeder and chassis.
SWR Test
After you have installed the antenna feeder system, you must
test the SWR of each antenna feeder, which must be no greater
than 1.3. If this requirement is not met, must check if the feeder
connector has been installed properly, and any fault or damage
in Antenna, feeder or jumper.
test the SWR of each antenna feeder, which must be no greater
than 1.3. If this requirement is not met, must check if the feeder
connector has been installed properly, and any fault or damage
in Antenna, feeder or jumper.