SendFar Technology Co. Ltd. OAB-03001 Manuale Utente
Press “Esc” keystroke to reboot the SF-3000 and during the boot process,
press “x”, then it will display prompt character NetARM> as shown in
following figure:
press “x”, then it will display prompt character NetARM> as shown in
following figure:
- Upgrade the Firmware using RS-232 console
Please refer to 2.5.3, it will introduce how to use RS-232 console in
- Identify the IP Address assigned to the unit.
Press “h” keystroke, it will display related commands as shown in following
figure:
figure:
If the connection is ok, when the SF-3000 is powered up, the “Current
Network Status” will be displayed as shown in following:
Version 1.00
15
Version 1.00
14