Redline Communications Inc. AN80IB Manuale Utente
User
AN-80i
Manual
70-00072-01-06a
Proprietary Redline Communications © 2008
Page 15 of 96
June 1, 2008
2.6 Antenna
Alignment
The AN-80i includes both an audible alignment tool and a web-based alignment tool to
assist in pointing the antenna.
assist in pointing the antenna.
2.6.1 Web Page Alignment
The most reliable method for obtaining optimum performance from a wireless link is to
align the antenna to the position providing the highest RSSI value and the best SINADR
ratio. The web page alignment tool provides continuous updates (1 second intervals) of
the measured RSSI (received signal strength indication) and SINADR (Signal to noise
and distortion ratio). This web page can be accessed from a laptop computer and most
web-enabled handheld devices.
Use the following URL to access the AN-80i alignment web page:
align the antenna to the position providing the highest RSSI value and the best SINADR
ratio. The web page alignment tool provides continuous updates (1 second intervals) of
the measured RSSI (received signal strength indication) and SINADR (Signal to noise
and distortion ratio). This web page can be accessed from a laptop computer and most
web-enabled handheld devices.
Use the following URL to access the AN-80i alignment web page:
http:// [AN-80i IP Address] / usr / aa.html
For example:
http://192.168.20.30/usr/aa.html
2.6.2 Audible
Alignment
The signal will sound infrequently when a low signal is detected, and more often as the
signal strength increases. The audible signal is enabled and disabled through the user
interface:
Web: See Antenna Alignment Buzzer Enable under Wireless Configuration on page 28.
Telnet: See buzzer in CLI Set commands under Set on page 67.
The audible antenna alignment tool provides only rough adjustment for the subscriber
antennas. It is recommended to monitor the RSSI measurements to achieve maximum
signal strength when performing fine adjustments to the subscriber antenna. Refer to the
AN-80i Installation Guidelines for detailed instructions.
signal strength increases. The audible signal is enabled and disabled through the user
interface:
Web: See Antenna Alignment Buzzer Enable under Wireless Configuration on page 28.
Telnet: See buzzer in CLI Set commands under Set on page 67.
The audible antenna alignment tool provides only rough adjustment for the subscriber
antennas. It is recommended to monitor the RSSI measurements to achieve maximum
signal strength when performing fine adjustments to the subscriber antenna. Refer to the
AN-80i Installation Guidelines for detailed instructions.