PointRed Telecom Ltd. MCRD-2458 Manuale Utente
M i c r o R e d & M i c r o V i e w N M S U s e r M a n u a l v 1 . 0
Page 130
10.5.5.
HotSpot running, but no active DHCP Server
HotSpot uses its built in DHCP server; there is no mis-configuration.
10.5.6.
A user not authenticated, but can access the Internet
Check if the domain user has accessed is in the Walled Garden domains.
10.5.7.
MicroView NMS lost connectivity with HotSpot
x
If you access HotSpot through the WAN interface, make sure WAN
interface has established its connectivity, or you have not selected
HIGH Protection Level in HotSpot configuration (in this situation
the MNMS connection from WAN is dropped).
interface has established its connectivity, or you have not selected
HIGH Protection Level in HotSpot configuration (in this situation
the MNMS connection from WAN is dropped).
x
If you access HotSpot through the HotSpot LAN interfaces, and
you have selected HIGH Protection Level in HotSpot configuration,
MNMS connection cannot be established.
you have selected HIGH Protection Level in HotSpot configuration,
MNMS connection cannot be established.
x
If you access HotSpot through the HotSpot LAN interfaces, and
you have configured your MAC address as the administrator’s
MAC, then enable DHCP client on your computer. If you cannot
obtain an IP address, configure your computer with a static IP
address, the first in Dynamic IP addresses (x.x.x.2) and try again
(May be HotSpot is initializing).
you have configured your MAC address as the administrator’s
MAC, then enable DHCP client on your computer. If you cannot
obtain an IP address, configure your computer with a static IP
address, the first in Dynamic IP addresses (x.x.x.2) and try again
(May be HotSpot is initializing).
x
If there is another interface, neither WAN nor LAN, try to connect
through it.
through it.