PointRed Telecom Ltd. MCRD-2458 Manuale Utente
M i c r o R e d & M i c r o V i e w N M S U s e r M a n u a l v 1 . 0
Page 135
When NTP is enabled, MicroRed will periodically send a request to a configured
NTP server (based Interval time) and adjust MicroRed’s local system time.
NTP server (based Interval time) and adjust MicroRed’s local system time.
To configure NTP, select the NTP tab under the Services tab. Configure the
NTP tab fields as follows:
NTP tab fields as follows:
NTP Enable
Select the NTP Enable checkbox to enable NTP
Select the NTP Enable checkbox to enable NTP
Port
The Port field contains the router port that the NTP module listens to for NTP
server responses (default 123). Typically you will not have to change this value.
The Port field contains the router port that the NTP module listens to for NTP
server responses (default 123). Typically you will not have to change this value.
Domain
The Domain field contains the domain name or IP address of the NTP server.
The Domain field contains the domain name or IP address of the NTP server.
Interval
The Interval field contains the interval, in minutes, between two consecutive
requests (default 60 minutes).
The Interval field contains the interval, in minutes, between two consecutive
requests (default 60 minutes).
Submit
Click Submit to apply the configuration.
Click Submit to apply the configuration.
Figure 138. NTP Service Configuration
11.5.
Setting the Administrator Password
To configure the administrator password, select the Security tab under the
Services tab.
Services tab.
Configure the Security tab fields as follows:
Old Password
Type the current password in the Old Password text box. The default password
is:
Old Password
Type the current password in the Old Password text box. The default password
is:
admin