Geophysical Survey Systems Inc. D50300800 Manuale Utente
Quick Start Guide
UtilityScan DF
Copyright © 2012 Geophysical Survey Systems, Inc.
5
All Rights Reserved
Powering and Booting Up
1
Assemble the cart as shown in Appendix A: Cart Assembly Instructions.
Important: Antenna battery must be attached to the antenna before continuing to Step 2.
2
To power up the system:
a)
Press and hold the power button on the ToughBook for
about 2 seconds until a green light illuminates above the
power button. A green light will blink on the antenna
during the system boot up. It will be off when the boot up
process is complete. This green light will illuminate when
communication is re-established.
about 2 seconds until a green light illuminates above the
power button. A green light will blink on the antenna
during the system boot up. It will be off when the boot up
process is complete. This green light will illuminate when
communication is re-established.
b)
After a few seconds, when the system boot up is complete,
the UtilityScan DF Start Screen is displayed.
the UtilityScan DF Start Screen is displayed.
c)
Tap either:
• A1 Icon or press the A1 button to start.
• A5 Icon or press the A5 button to update system
• A5 Icon or press the A5 button to update system
software.