Geophysical Survey Systems Inc. D50300800 Manuale Utente
Quick Start Guide
UtilityScan DF
Copyright © 2012 Geophysical Survey Systems, Inc.
7
All Rights Reserved
Powering Down
It is essential that these steps are followed in order when powering down the system.
Failure to do so may result in boot-up issues*.
Failure to do so may result in boot-up issues*.
1
Tap on System Options.
2
Tap on System Shutdown.
3
Tap either:
• Exit: Close Application to return to start screen. At this point,
press and hold the power button for about 3 seconds.
The system will shut down properly.
The system will shut down properly.
• Power Off: Close Application and turn OFF System power.
The system will automatically shut down. (Recommended)
* If the system was not powered down properly and before the next time you
power up, you must remove and disconnect the battery on the antenna, the re-
connect it. This will turn the antenna off, then back on. You can now power
up normally.
power up, you must remove and disconnect the battery on the antenna, the re-
connect it. This will turn the antenna off, then back on. You can now power
up normally.