Manualsbrain.com
  1. Manuali
  2. Marche
  3. Tagsys S.A.
  4. LIBSECPEDEST2
  5. Manuale Utente

Tagsys S.A. LIBSECPEDEST2 Manuale Utente

Scarica
Pagina di 50
  
Installation 
 
3.  Remove the pedestal from the box. 
4.  Place the cover face to you with the display counter on the other side then remove the 4 
screws  from the  bottom cover. 
Figure 3: L-SP2 Bottom 
 
The 4 screws  
 
5.  Remove the plastic cover and then un-clip the metallic cover of the electronics box. Then pull 
out the opposed cover which will come together with the opposite metallic cover. 
 
Figure 4: Open Pedestal Bottom 
 
Cable access hole 
Ac main PCB 
 
6.  Place the pedestal base over the cable access over the mounting holes. 
 
CAUTION :
 AC mains 110/220V. Be sure power supply cable is not connected to the main for 
the following operations. 
 
December 2004 
Revision 1.0 
17/50