Huawei Technologies Co. Ltd HG532X Manuale Utente

9 

By configuring the HG532a and your computer, you can choose any of the following 
methods to surf the Internet: 

z

 

z

 

If you select this method for accessing the network, the HG532a starts to set up a 
dial-up connection automatically after the startup. You can access the network after you 
power on your computer. You do not need to install any special dial-up software on 
your computer or perform dial-up operations on your computer. To configure the 
HG532a and your computer for the network access, do as follows: 
Step 1  Log in to the Web-based configuration utility of the HG532a. 

1.  Launch the Internet Explorer on your computer. Enter http://192.168.1.1 

in the address bar, and then press Enter. 

2.  In the displayed dialog box, enter the user name and the password, and 

then click OK. 

By default, both the user name and the password are admin. After the user name and 
the password are verified, you can access the Web-based configuration utility. 
Step 2  Enable the embedded dial-up function. 

1.  In the navigation tree on the left of the Web-based configuration utility, 

choose Basic > WAN. 

2.  Click New to create a new PVC. 
3.  Enter the VPI and VCI parameters that are provided by the network 

operator in the VPI/VCI text boxes. 

4.  Select Route from the Connection mode drop-down combo box. 
5.  Select PPPoE from the Connection type drop-down combo box. 
6.  Enter the user name and password that are provided by the network 

operator in the Username and Password text boxes, keep the default 
settings of other parameters. 

7.  Click Submit. 

After you complete the preceding settings, you can surf the Internet. 
You need to perform the preceding operations on a computer once only. The next time 
when you power on your computer, you can surf the Internet without any configuration.