Vivato Inc. VLJ24WFSW Manuale Utente

Using this configuration, a client moving within the area of the Wi-Fi Switch’s antenna pattern will 
continue to see the same network name in its “Available Networks” window. At the same time, 
another client could be communicating simultaneously with the Wi-Fi Switch under the same 
network name but on a different channel.

Wireless signals are reflected by solid objects, causing the focused antenna patterns to 
“bounce around” in enclosed areas. This is especially true in an office environment, where 
many objects tend to reflect the Wi-Fi Switch’s signals in many directions. Therefore, the 
signal from a particular wireless interface that is not pointing directly at a client may still 
provide very good data rates to that client.

You can configure each interface separately or configure all interfaces at one time. To edit a 

single interface’s settings, click on the 

 symbol next to that interface. To edit all wireless 

interfaces, select “Edit Wireless Group Settings”.

wlan1, wlan2, wlan3, wlan4, wlan5, wlan6

wifi_switch

11

wlan7, wlan8, wlan9, wlan10, wlan11, wlan12, wlan13 wifi_switch

1

wlan9

wlan2

wlan11

wlan4

wlan7 wlan1

wlan13 wlan6

wlan10 wlan3

wlan12

wlan5

wlan8

100°

Channel

1

11

1 

11

1

11

1

11

1

11

11

1

1

Channel assignments are mirrored. For example, if you change the channel 
of wlan11, the channel for wlan12 is automatically set to the same channel.

Vivato Wi-Fi Switch (Top View)