Tranzeo Wireless Technologies Inc GNVPZ1NT3 Manuale Utente
Chapter 8: System Settings
TR0153 Rev. E1
59
Figure 30. SNMP configuration
8.11 Location
Two types of device location information can be stored:
• Latitude/longitude/altitude
• Postal address or description a device’s location
• Postal address or description a device’s location
Note that these values are not automatically updated and must be entered after a device has
been installed. Altitude is in meters. Latitude and longitude must be given as geographic
coordinates in decimal degrees, with latitude ranging from -90 to 90 (with negative being south,
positive being north) and longitude ranging from -180 to 180 (with negative being west, positive
being east).
CLI
The geographic location of the EnRoute500 can be stored in the following fields in the ‘sys’
interface:
• sys.location.gps.altitude
• sys.location.gps.latitude
• sys.location.gps.longitude
For example, you can set the latitude value as follows.
interface:
• sys.location.gps.altitude
• sys.location.gps.latitude
• sys.location.gps.longitude
For example, you can set the latitude value as follows.