Tranzeo Wireless Technologies Inc GNVPZ1NT3 Manuale Utente
Chapter 11: Ethernet Interface Configuration
TR0153 Rev. E1
80
11.2 IP Configuration for Gateway Devices
When an EnRoute500 is configured as a gateway, the Ethernet interface is used to provide
backhaul capability by connecting it to a WAN or directly to the Internet. Clients cannot connect
to the EnRoute500 through the Ethernet interface when operating in this mode. The Ethernet
interface IP address can either be acquired from a DHCP server on the WAN or be set
manually.
backhaul capability by connecting it to a WAN or directly to the Internet. Clients cannot connect
to the EnRoute500 through the Ethernet interface when operating in this mode. The Ethernet
interface IP address can either be acquired from a DHCP server on the WAN or be set
manually.
Figure 41. Wired interface parameters with EnRoute500 using wired interface for backhaul
11.2.1
DHCP
When configured as a gateway, the EnRoute500 can be set to obtain an obtain an IP address
for its Ethernet interface using DHCP. To enable the DHCP client mode on the Ethernet
interface, set the Ethernet DHCP mode to ‘client’. When configured as a DHCP client, the
EnRoute500 will continually attempt to contact a DHCP server until it is successful.
for its Ethernet interface using DHCP. To enable the DHCP client mode on the Ethernet
interface, set the Ethernet DHCP mode to ‘client’. When configured as a DHCP client, the
EnRoute500 will continually attempt to contact a DHCP server until it is successful.