Inovonics Wireless Corporation 3B6OTPMTX Manuale Utente
Registration
Confidential
12
3. The application controller receives the registration message, associates the
device’s UID with appropriate application information, and lets the end user
know registration was successful.
know registration was successful.
4.3 Registration Procedure from the Developer’s
Perspective
Perspective
The developer must provide
1. A means of initiating an inbound registration message from the device to
the network coordinator.
While in registration mode, the application controller should indicate when it is
ready for the user to trigger a registration message from the device. A
registration message is simply a reset message sent from the device. A reset
message will be sent when the Reset button is pressed on the device to be
registered.
ready for the user to trigger a registration message from the device. A
registration message is simply a reset message sent from the device. A reset
message will be sent when the Reset button is pressed on the device to be
registered.
2. A means of processing the message as it is passed from the RF gateway to
the application controller.
The registration message transmitted in the previous step will be received by
the RF gateway and delivered serially to the application controller. The
application controller must validate this message, extract the device’s UID,
and store it in the application database. Thereafter, the UID will be used to
associate the wireless point with program functionality.
the RF gateway and delivered serially to the application controller. The
application controller must validate this message, extract the device’s UID,
and store it in the application database. Thereafter, the UID will be used to
associate the wireless point with program functionality.
3. A means of letting the user know the registration message has been
received by the application controller.
At a minimum, the application controller should provide some indication that
the registration was successful. Preferably, the UID of the registered device
should be displayed. At this time the application controller may begin the setup
process for the next point or may begin normal operation. This action is
application specific.
the registration was successful. Preferably, the UID of the registered device
should be displayed. At this time the application controller may begin the setup
process for the next point or may begin normal operation. This action is
application specific.
4.4 Device Reset, Application Controller Not in
Registration Mode
Registration Mode
There are cases where the device will send a reset message when the
application controller is not in registration mode. When the battery is changed
on an EchoStream device, for instance, it must be reactivated by the user
pressing the reset button. A device may also transmit a reset message upon
application controller is not in registration mode. When the battery is changed
on an EchoStream device, for instance, it must be reactivated by the user
pressing the reset button. A device may also transmit a reset message upon