Inovonics Wireless Corporation 3B6OTPMTX 사용자 설명서

Registration

Confidential

 12

 3. The application controller receives the registration message, associates the 

device’s UID with appropriate application information, and lets the end user 
know registration was successful.

The developer must provide

 1. A means of initiating an inbound registration message from the device to 

the network coordinator.

While in registration mode, the application controller should indicate when it is 
ready for the user to trigger a registration message from the device. A 
registration message is simply a reset message sent from the device. A reset 
message will be sent when the Reset button is pressed on the device to be 
registered.

 2. A means of processing the message as it is passed from the RF gateway to 

the application controller.

The registration message transmitted in the previous step will be received by 
the RF gateway and delivered serially to the application controller. The 
application controller must validate this message, extract the device’s UID, 
and store it in the application database. Thereafter, the UID will be used to 
associate the wireless point with program functionality.

 3. A means of letting the user know the registration message has been 

received by the application controller.

At a minimum, the application controller should provide some indication that 
the registration was successful. Preferably, the UID of the registered device 
should be displayed. At this time the application controller may begin the setup 
process for the next point or may begin normal operation.  This action is 
application specific.

There are cases where the device will send a reset message when the 
application controller is not in registration mode. When the battery is changed 
on an EchoStream device, for instance, it must be reactivated by the user 
pressing the reset button. A device may also transmit a reset message upon