Honeywell International Inc. CS19A Manuale Utente

4 - 14

Note: Scanner Time-Out applies only to corded scanners.  It does not apply to 

cordless systems. 

Scanner Time-Out powers down the scanner after the unit has been idle for the 
specified time.  To prevent the scanner from powering down, set this time-out to 
0.  Sca Scanner Time-Out, then set the time-out by scanning digits (from 0 - 
999,999 ms) from the inside back cover, then scanning Save.  

Default = 60,000 

ms.

This feature allows you to turn the aimer on and off.  When the Interlaced bar 
code is scanned, the aimer is interlaced with the illumination LEDs.  

Default = 

Interlaced.  

Use Centering to narrow the scanner’s field of view to make sure the scanner 
reads only those bar codes intended by the user.  For instance, if multiple codes 
are placed closely together, centering will insure that only the desired codes are 
read.  (Centering  can be used in conjunction with 

, page 4-13, for 

the most error-free operation in applications where multiple codes are spaced 
closely together.  Using the Aimer Delay and Centering features, the scanner 
can emulate the operation of older systems, such as linear laser bar code scan-
ners.)

Preliminary Draft