Honeywell International Inc. CS19A Manuale Utente

4 - 17

Scan a bar code below to enable or disable Preferred Symbology.    

Default = 

Preferred Symbology Off.

To specify the high priority symbology, scan the High Priority Symbology 

bar code below.  On the 

you want to set as high priority.  Locate the Hex value for that symbology 
and scan the 2 digit hex value from the Programming Chart (inside back 
cover).  Scan Save to save your selection.  

Default = None

To specify the low priority symbology, scan the Low Priority Symbology bar 

code below.  On the 

on page A-1, find the symbology you 

want to set as low priority.  Locate the Hex value for that symbology and 
scan the 2 digit hex value from the Programming Chart (inside back cover).  

If you want to set additional low priority symbologies, scan FF, then scan 
the 2 digit hex value from the Programming Chart for the next symbology.  

You can program up to 5 low priority symbologies.  Scan Save to save your 
selection.  

Default = None

Once you have enabled Preferred Symbology and entered the high and low 
priority symbologies, you must set the time-out period.  This is the period of 
time the scanner will search for a high priority bar code after a low priority 

Preliminary Draft