Honeywell International Inc. CS19A Manuale Utente

4 - 23

With No Read turned On, the scanner notifies you if a code cannot be read.  If 
using an EZConfig Tool Scan Data Window (see page 

), an “NR” appears 

when a code cannot be read.  If No Read is turned Off, the “NR” will not appear.  

Default = Off.

If you want a different notation than “NR,” for example, “Error,” or “Bad Code,” 
you can edit the output message (see 

The hex code for the No Read symbol is 9C.  

Video Reverse is used to allow the scanner to read bar codes that are inverted.  
The Video Reverse Off bar code below is an example of this type of bar code.  
Scan Video Reverse Only to read 

only inverted bar codes.  Scan Video 

 to read both types of codes. 

Note: After scanning Video Reverse Only, menu bar codes cannot be read.  

You must scan Video Reverse Off or Video Reverse and Standard Bar 
Codes

 in order to read menu bar codes.

Note: Images downloaded from the unit are not reversed.  This is a setting for 

decoding only.

VIDREV0REV.

Preliminary Draft