Honeywell International Inc. CS19A Manuale Utente

7 - 24

The numeric system digit of a U.P.C. symbol is normally transmitted at the 
beginning of the scanned data, but the unit can be programmed so it will 
not transmit it.

   Default = On.

This selection adds 2 or 5 digits to the end of all scanned UPC-A data.

Default = Off for both 2 Digit and 5 Digit Addenda.

When Required is scanned, the scanner will only read UPC-A bar codes 
that have addenda.  You must then turn on  a 2 or 5 digit addenda listed on 

.  

Default = Not Required.

Preliminary Draft