Honeywell International Inc. CS19A Manuale Utente

8 - 15

www.honeywellaidc.com

.  Click on Soft-

.  Select 4600r from the Products list, then select QuickView 

.  

Below is an example of a signature capture application.  In this example, the 
aimer is centered over the signature capture area and the trigger is pressed.  A 
single beep is emitted, indicating that the scanner has read a Code 128 bar 
code and the data has been transferred to the host.  An IMGBOX command 
may now be sent from the host to specify the coordinates of the signature cap-
ture area below that code, and indicating that only that area containing the sig-
nature should be transferred as an image to the host.

To see this example, align the aimer with the signature area (not with the bar 
code), then press the trigger.  

Send the following IMGBOX command string after the button push:

Note: Case is not important in the command string.  It is used here only for 

clarity.

The following image is captured:

The IMGBOX commands have many different modifiers that can be used to 
change the size and appearance of the signature image output by the scanner.  
Modifiers affect the image that is transmitted, but do not affect the image in 
memory.  Modifiers always begin with a number and end with a letter (case 
insensitive).  Any number of modifiers may be appended to the IMGBOX com-
mand.
Note: The IMGBOX command will return a NAK unless a window size (width 

Preliminary Draft