Honeywell International Inc. CS19A Manuale Utente

8 - 18

For example, use 2500 to specify a resolution of 2.5.  Set  to zero when 
using the A and B modifiers (see 

All dimensions used in IMGBOX are measured as multiples of the minimum 
element size of the bar code.  The bar code aspect ratio allows you to set 
the ratio of the bar code height to the narrow element width.  In the exam-
ple, the narrow element width is .010 inches and the bar code height is 
0.400 inches, resulting in a value of S = 0.4/0.01 = 40.

The width of the signature capture area must be measured in inches 
divided by .01.  In the example, the width of the area to be captured is 2.4 

inches, resulting in a value of W = 2.4/0.01 = 240.  (A value of 245 was 
used in the example to accommodate a slightly wider image area.)

The horizontal bar code offset allows you to offset the horizontal center of 
the signature capture area.  Positive values move the horizontal center to 
the right and negative values to the left.  Measurements are in multiples of 

the minimum bar width.  

Example of Resolution set to 1000R:

Example of Resolution set to 0R:

Example of Resolution set to 2000R:

Example:   

Example of Horizontal Offset set to -75X:

Example of Horizontal Offset set to 75X:

Preliminary Draft