Honeywell International Inc. CS19A Manuale Utente

2 - 2

The RS232 Interface bar code is used when connecting to the serial port 
of a PC or terminal.  The following RS232 Interface bar code also pro-
grams a carriage return (CR) and a line feed (LF) suffix, baud rate, and 
data format as indicated below.  It also changes the trigger mode to man-
ual.

Scan one of the following “Plug and Play” codes to program the scanner for 
an IBM POS terminal interface.
Note: After scanning one of these codes, you must power cycle the cash 

register.

Baud Rate

115,200 bps

Data Format

8 data bits, no parity bit, 1 stop bit

Preliminary Draft