Honeywell International Inc. CS19A Manuale Utente

2 - 27

 must be scanned so the scanner will wait for an ACK 

or NAK from a bioptic scanner after each packet is sent.  The Scanner-
Bioptic ACK/NAK Timeout (below) controls how long the scanner will wait 
for a response.  

Default = Bioptic ACK/NAK Off.

This allows you to set the length (in milliseconds) for a timeout for a bioptic 

scanner’s ACK/NAK response.  Scan the bar code below, then set the time-
out (from 1-30,000 milliseconds) by scanning digits from the inside back 
cover, then scanning Save.   

Default = 5100.

Preliminary Draft