Honeywell International Inc. CS19A Manuale Utente

2 - 26

the scanner waits for ACK/NAK again.  Turn on the ACK/NAK protocol by 
scanning the ACK/NAK On bar code below.  To turn off the protocol, scan 
ACK/NAK Off

.  

Default = ACK/NAK Off.

The following settings are used to set up communication between Honeywell 
scanners and bioptic scanners.  
Note: The scanner’s baud rate must be set to 38400 and the RS232 timeout 

must be set to 3000 in order to communicate with a bioptic scanner.  See 

further information.

 must be scanned to set the scanner’s format so it is com-

patible with a bioptic scanner.  

Default = Packet Mode Off.

Preliminary Draft