Honeywell International Inc. CS19A Manuale Utente

3 - 7

To display the power indicator on the base, scan the Base Power Commu-
nication Indicator On bar code.  To turn off the power indicator, scan the Off 
bar code.  

Default = On.  

Scanning this bar code causes the scanner to re-link with the base.

If you want to be able to scan bar codes while the scanner is in the base cradle, 
scan the Scanning in Cradle on bar code below.  If you want to only allow scan-
ning when the scanner is out of the base cradle, scan Scanning in Cradle Off.  

Default = Scanning in Cradle Off.

Preliminary Draft