Honeywell International Inc. CS19A Manuale Utente

3 - 11

Locked Link Mode and Open Link Mode are the link modes that accommo-
date different applications.  Scan the appropriate bar codes included in the 
Open Link and Locked Link Mode explanations that follow to switch from 
one mode to another.  

Default = Open Link Mode.

If you link a scanner to a base using the Locked Link Mode, other 
scanners are blocked from being linked if they are inadvertently placed 
into the base.  If you do place a different scanner into the base, it will 

charge the scanner, but the scanner will not be linked. 

To use a different scanner, you need to unlink the original scanner by 
scanning the Unlink Scanner bar code. (See 

When newly shipped or defaulted to factory settings, the base and 

scanner are not linked.  By placing a scanner into the base, they estab-
lish a link.  Placing a different scanner into the base establishes a new 
link and the old scanner is unlinked.  Each time a scanner is placed 

into the base, it becomes the linked scanner; the old scanner is 
unlinked.

If the base has a scanner linked to it, that scanner must be unlinked before a 
new scanner can be linked.  Once the previous scanner is unlinked, it will no 
longer communicate with the base.  To unlink a scanner from the base, scan the 
Unlink Scanner 

bar code below.

Preliminary Draft