Honeywell International Inc. CS19A Manuale Utente

4 - 5

The number of beeps of a good read can be programmed from 1 - 9.  The 
same number of beeps will be applied to the beeper and LED in response 
to a good read.  For example, if you program this option to have five beeps, 
there will be five beeps and five LED flashes in response to a good read.  
The beeps and LED flashes are in sync with one another.  To change the 

number of beeps, scan the bar code below and then scan a digit (1-9) bar 
code and the Save bar code on the 

cover of this manual.  

Default = 1.

The number of beeps and LED flashes emitted by the scanner for a bad 

read or error can be programmed from 1 - 9.  For example, if you program 
this option to have five error beeps, there will be five error beeps and five 
LED flashes in response to an error.  To change the number of error beeps, 

scan the bar code below and then scan a digit (1-9) bar code and the Save 
bar code on the 

 inside the back cover of this manual.  

Default = 1.

Preliminary Draft