Honeywell International Inc. CS19A Manuale Utente

4 - 6

This sets the minimum amount of time before the scanner can read another 
bar code.  

Default = 0 ms (No Delay).

If you want to set your own length for the good read delay, scan the bar 
code below, then set the delay (from 0-30,000 milliseconds) by scanning 
digits from the inside back cover, then scanning Save. 

When in manual trigger mode, the scanner scans until a bar code is read, 
or until the trigger is released.  Two modes are available, Normal and 
Enhanced

.   Normal mode offers good scan speed and the longest work-

ing ranges (depth of field).  Enhanced mode will give you the highest possi-

Preliminary Draft