Honeywell International Inc. IM14 Manuale Utente
IF2 Network Reader
11
Note: The IF2 is certified to an IP53 environmental rating only when mounted as shown.
Step 5.
Ground the IF2.
Connect the IF2 to Your Network
After you place the IF2 in its mounting location, you can connect it to your network.
Step 1.
Install the IF2 in its mounting location. For help, see
Step 2.
Attach one to four RFID antennas to the RFID antenna ports, starting
with port 1. For help, see
with port 1. For help, see
Step 3.
Connect an Ethernet cable to the IF2 Ethernet port.
Step 4.
Connect power to the IF2:
•
If you are using DC power, connect the DC power cord to a power source and to
the power port on the IF2.
the power port on the IF2.
•
If you are using Power Over Ethernet, connect the Ethernet cable to the Ethernet
port and use an 802.3at compliant power converter to power the IF2.
port and use an 802.3at compliant power converter to power the IF2.
When you apply power, the IF2 boots and the green Power LED turns on.
Note: If you are using a DHCP server, make sure the server is running before you connect
power to the IF2.
The IF2 is now ready to communicate with your network. Once the IF2 has been
assigned an IP address (either manually or from your DHCP server), you can use
the web browser interface to complete configuration. For help, see
assigned an IP address (either manually or from your DHCP server), you can use
the web browser interface to complete configuration. For help, see
.
Set the Date and Time
After you have installed the IF2, you can set the date and time via the web browser
interface.
interface.
Mounting screw
(4 places)
(4 places)