Honeywell International Inc. IM14 Manuale Utente
4
IF2 Network Reader
About the Top Panel Ports
The IF2 top panel ports consist of four antenna ports, a reset switch, and a USB
service port.
service port.
IF2 Top Panel Ports
Port
Description
GPIO
General purpose input/output (GPIO) port that
connects the IF2 to industrial controls such as relays
or indicators.
For more information on the IF2 GPIO interfaces, see
connects the IF2 to industrial controls such as relays
or indicators.
For more information on the IF2 GPIO interfaces, see
DC power
Connects the reader to a 12 volt DC power source.
COM1
Connects the IF2 to a desktop PC for configuration.
Use an RS-232 null modem cable (P/N 059167).
Use an RS-232 null modem cable (P/N 059167).
Ethernet
10BaseT/100BaseTx port that connects the reader to
your Ethernet network. The reader auto-negotiates
with the server to set the best data rate. This port uses
MDI/MDI-X auto-switching so you can connect either
a standard Ethernet cable or a crossover cable.
The Ethernet port also supports POE. To use POE you
need an 802.3at compliant power converter. For more
information, contact your sales representative.
your Ethernet network. The reader auto-negotiates
with the server to set the best data rate. This port uses
MDI/MDI-X auto-switching so you can connect either
a standard Ethernet cable or a crossover cable.
The Ethernet port also supports POE. To use POE you
need an 802.3at compliant power converter. For more
information, contact your sales representative.
Antenna port
(4 places)
(4 places)
Reset switch
USB service
port
port