Honeywell International Inc. 760004 Manuale Utente

3 - 21

Dolphin terminals feature intelligent battery technology with two types of battery power: 

•

The main battery pack on the back panel (see 

•

The backup battery located inside the terminal (see 

Both batteries work together to prevent data loss when the terminal is used over long periods of time. 

Use only the Li-ion battery packs provided by Honeywell. Use of any battery not sold/manufactured by 
Honeywell may result in damage not covered by the warranty.

The Li-ion battery pack is 3.7V/3240mAh/12.0Wh and 
the primary power source for both the Dolphin terminal 
and the internal backup battery. 

Changing the Main Battery Pack

Before installing a battery pack, press the Blue + 
Backlight keys to put the terminal in 

(see page 3-26) so that operations are suspended 
before removing the main power source. Always put the 
terminal in suspend mode prior to changing the battery.

When the battery is installed in the terminal, you can insert the terminal into any one of the following 
peripherals:

•

•

•

Charge/Comm Cable (see page 

To fully charge the Li-ion battery before installing in the terminal, use the 

•

The Li-ion battery pack requires four hours to charge to full capacity.

Battery Pack Storage Guidelines

To maintain optimal battery performance, follow these storage guidelines:

• Avoid storing batteries outside the specified range of -4 to 122° F (-20 to 50°C) or in extremely high 

humidity.

• For prolonged storage, do not keep batteries stored in a charger that is connected to a power source. 

Guidelines for Battery Pack Use and Disposal

The following are general guidelines for the safe use and disposal of batteries:

• Use only the Li-ion battery packs provided by Honeywell. Use of any battery not sold/manufactured by 

Honeywell may pose a personal hazard to the user.

• Replace defective batteries immediately; using a defective battery could damage the Dolphin terminal.

!