Honeywell International Inc. 7850LPE Manuale Utente
9 - 6
Troubleshooting
If you encounter problems with your Dolphin QuadCharger, refer to chart below for possible solutions. If problems persist, please
contact
contact
Problem
Issue
The Status LED does not come on when
I insert a battery pack into the Dolphin
QuadCharger
I insert a battery pack into the Dolphin
QuadCharger
Check the power connections on the Dolphin QuadCharger; make sure the
POWER switch is ON and the battery pack is properly seated.
POWER switch is ON and the battery pack is properly seated.
The Status LED lights red during
charging.
charging.
Try to charge the battery in one of the other charging slots. If the red Status
LED comes on again, then the problem is associated with the battery pack.
If the red status stays with the charging slot, the problem is associated with
the charging circuity.
LED comes on again, then the problem is associated with the battery pack.
If the red status stays with the charging slot, the problem is associated with
the charging circuity.
The Status LED lights red and stays on
without a battery in the charging slot.
without a battery in the charging slot.
An error occurred during the self-diagnostic test for that particular charging
pocket. Call Hand Held Products Product Service and request an RMA.
pocket. Call Hand Held Products Product Service and request an RMA.
For additional warranty and return information, see