Honeywell International Inc. 7850LPE Manuale Utente
10 - 3
Using the Dolphin Mobile Charger
The Dolphin Mobile Charger connects the terminal to a vehicle power source. This cable powers the terminal and charges the
main battery pack.
main battery pack.
Terminal Connector
The terminal connector connects the communication cable to the mechanical
connector (see
connector (see
) on the bottom panel of
the terminal. The pins in this connector work only with the mechanical
connector on the terminal.
connector on the terminal.
Jackscrews
The jackscrews secure the terminal connector to the mechanical connector
on the terminal. Once the terminal connector is plugged into the mechanical
connector on the bottom panel of the terminal, turn both jackscrews to the
right to secure the connection.
on the terminal. Once the terminal connector is plugged into the mechanical
connector on the bottom panel of the terminal, turn both jackscrews to the
right to secure the connection.
Vehicle Power Adapter
The vehicle power adapter plugs into a standard vehicle power source and
converts voltage to the 9.5 volts DC required by the terminal.
converts voltage to the 9.5 volts DC required by the terminal.
Using the Dolphin Mobile Charger Inside a Vehicle
Using the Dolphin Mobile Charger in combination with the Dolphin Mobile Mount powers and secures the terminal inside a
vehicle.
vehicle.
1. Insert the terminal into the Mobile Mount.
2. Install the Mobile Mount inside the vehicle.
3. Plug the
(see page 10-3) of the Dolphin Mobile Charger into the mechanical connector on the bottom
panel of the terminal.
4. Tighten the
5. Plug the
(see page 10-3) into the vehicle power outlet.
Note: Dolphin terminals contain an intelligent battery charging system that monitors the charging of the battery pack to protect
the battery from damage by overcharging if left connected to a charging peripheral indefinitely.