Honeywell International Inc. 7850LPE Manuale Utente
8 - 6
Charging the Main Battery
The Dolphin HomeBase powers the terminal and fully charges its main battery pack in less than four hours. To check battery
power, see
power, see
As battery packs charge, the charging circuitry follows the two-step charging process (CC-CV) that is recommended for Li-Ion
batteries. The process monitors changes in temperature, current, and voltage.
batteries. The process monitors changes in temperature, current, and voltage.
Inserting a Terminal
1. Install the battery pack in the terminal; see
2. Power the Dolphin HomeBase; see
3. Slide the terminal into the terminal well until the Dock LED lights green to
indicate that the terminal is properly seated.
4. The battery pack begins charging.
The intelligent battery charging system in the terminal monitors battery power and
senses when a full charge has been obtained. When charging is complete, the
terminal switches to a trickle charge that keeps the battery at full charge while resting
in the Dolphin HomeBase.
senses when a full charge has been obtained. When charging is complete, the
terminal switches to a trickle charge that keeps the battery at full charge while resting
in the Dolphin HomeBase.