Honeywell International Inc. 7850LPE Manuale Utente

9 - 3

Supplying Power to the QuadCharger

Use the power adapter cable that comes with the Dolphin QuadCharger so that the input voltage is adjusted appropriately.

1. Locate the AC power adapter cable and plug it into the power source.

2. Connect the power cable to the power adapter.

3. Connect the power cable to the supply connector on the back of the QuadCharger.

4. Press the power switch to the ON position.

The power LED illuminates green, and the charger performs a self-diagnostic test that lasts approximately five seconds.

Bottom Panel

Recommendations for Storing Batteries

To maintain top performance from batteries, follow these storage guidelines:

•

Avoid storing batteries outside of the specified temperature range of -4 to 104° F (-20 to 40°C) or in extremely high humidity.

•

For prolonged storage, do not keep batteries stored in a charger that is connected to a power source.

REV.

MFG.

WK/YR

ITEM #

S/N #

7850-QCE

SC000001

Tested to Comply With FCC Standards
This Class B Digital apparatus complies with

FOR HOME OR OFFICE USE

Canadian ICES-003. Cet appariel numerique de la
Classe B est conforme a la norme NMB-003 du Canada.

Hand Held Products, Inc.

www.handheld.com

N10410

NO USER SERVICEABLE PARTS.

OPENING VOIDS WARRANTY. USE AUTHORIZED

HAND HELD PRODUCTS, INC BATTERY PACK

ONLY. OTHER TYPES OF BATTERIES MAY BURST

CAUSING INJURY TO PERSONS AND DAMAGE.

DO NOT CHARGE ALKALINE BATTERIES.

INDOOR USE ONLY.

NICHT IM FRIEN BENUTZEN.

NE PAS UTILISER a L’EXTERIEUR.
INPUT: 12 VDC @ 3A

OUTPUT: 8.4 VDC @ 0.8A (4)

FOR 7.4 V Li-Ion BATTERIES

QuadCharger

12V DC IN