Honeywell International Inc. 7850PGE Manuale Utente

There are four(4) charging slots. Each slot holds one battery. When a battery is placed in a 
slot, it immediately begins charging.   

This is the fourth slot and the only one that can be used to analyze a battery. When a battery 
is placed in this slot, it begins charging just as it does in the other three slots. However, if you 
press the ANALYZE button, it runs the battery in this slot through the complete Analyze cycle. 
For more information, see 

These LEDs give a readout of the remaining battery capacity after it has run through a 
complete analyze cycle. For more information, see 

Battery Capacity Indicator LEDs

 on page 

10-2.

Press this button to start a battery analyze cycle; see 

A status LED is located above each of the four(4) battery slots. The color of the LED indicates 
the charge status of the batteries in its slot.

The battery in the slot has completed its charge cycle and is ready to use.

The battery in the slot is being charged at a maximum charge rate.

The battery in the slot encountered an error during the most recent charge cycle.

Status LEDs

–with batteries

Charge/Analyze LED