Honeywell International Inc. 950009 Manuale Utente

SIM stands for Subscriber Information Module. A SIM card stores the subscriber's personal information, GSM/GPRS radio 
settings, security key, contacts, etc. SIM cards can be installed and removed from any mobile device, enabling you to switch 
devices without losing your personal information. SIM cards are obtained and activated by the network provider that supports the 
GSM/GPRS network.  

On the Dolphin 9500 terminal, the SIM card door is located in the battery well on the back panel. This enables easy access to 
the SIM card while securing it under an installed battery.

Note: You need a metric .05” allen head screwdriver to open the SIM card door. The SIM card must be activated by the service 

provider prior to insertion.

1. Turn off your terminal and lay it face-down on a flat surface.

2. Remove the battery pack. For details, see 

3. Unscrew the faceplate of the SIM card door. 

4. Insert your SIM card. Make sure the interface on the card is connected to the SIM Card interface in the slot; the beveled 

corner is in the upper right corner.

5. Place the SIM card door over the secured SIM card and secure the allen screws.

6. Install the battery pack. The terminal powers on.

Battery Well

SIM Card Door

Battery Interface

SIM Card Interface

Allen Screws

SIM Card Door

SIM Card