Honeywell International Inc. MX2702 Manuale Utente

Code pages define the mapping of character codes to characters.  If the data 
received does not display with the proper characters, it may be because the bar 
code being scanned was created using a  code page that is different from the one 
the host program is expecting.  If this is the case, scan the bar code below, select 
the code page with which the bar codes were created from the chart, 

on page A-4, and scan the value and the SAVE 

data characters should then appear properly.

< Default All Interleaved 2 of 5 Settings >

No Check Digit indicates that the scanner reads and transmits bar code data 
with or without a check digit.

Code 39 Code Page

*  On

Off