Honeywell International Inc. MX2702 Manuale Utente

< Default All Code 93 Settings >

Scan the bar codes below to change the message length.  Refer to 

lengths = 0-80.  Minimum Default = 0, Maximum Default = 80.

Code pages define the mapping of character codes to characters.  If the data 
received does not display with the proper characters, it may be because the bar 
code being scanned was created using a  code page that is different from the one 
the host program is expecting.  If this is the case, scan the bar code below, select 
the code page with which the bar codes were created from the chart, 

on page A-4, and scan the value and the SAVE 

data characters should then appear properly.

*  On

Off

Minimum Message Length

Maximum Message Length

Code 93 Code Page