Braemar Manufacturing LLC ER920W Manuale Utente
ER920W Wireless Event Monitor
22
Service and Maintenance
Cleaning
Remove the batteries before cleaning the recorder. Clean the battery
terminals with a soft dry cloth. Dampen a soft cloth with mild detergent
and water to clean the recorder, lead wires, and belt clip.
terminals with a soft dry cloth. Dampen a soft cloth with mild detergent
and water to clean the recorder, lead wires, and belt clip.
Remove any adhesives from the patient lead wires with an adhesive tape
remover solution or swab. Use a mild disinfectant. Do not use alcohol
or acetone on the lead wires since they could stiffen and the insulating
plastic could crack.
remover solution or swab. Use a mild disinfectant. Do not use alcohol
or acetone on the lead wires since they could stiffen and the insulating
plastic could crack.
Service
If there is a problem with the Monitor, review the problem descriptions
and solutions listed on the next page. If additional assistance is required
contact customer support via phone, Fax or E-mail listed on the next
page. Call customer support before returning a Monitor to make
shipping arrangements.
and solutions listed on the next page. If additional assistance is required
contact customer support via phone, Fax or E-mail listed on the next
page. Call customer support before returning a Monitor to make
shipping arrangements.
A.
Note there is not any preventative inspection or maintenance
that can be performed by the end user.
that can be performed by the end user.
Service Items and Accessories
Description Part
Number
Patient lead, 1 channel, Shielded
350-0173-09
Patient lead, 2 channel, Shielded
350-0173-10
Monitor belt clip / Holster
100-1764-002
Necklace 350-0180-00
Operator manual
Operator manual
600-0640-00
3.6V Lithium Thionyl Battery Pack
350-0294-00
Notes:
A. Only accessories listed above are meant for use with the Monitor.
B. Dispose of batteries in accordance with Federal, State, and Local
laws.
ER920W Wireless Event Monitor
11
User Defined options continued.
Display Option
Description
POST-EVENT
SOUND
SOUND
Default = OFF
ON = Sound on while recording
during the Post-Event time.
OFF = Sound off while recording
an event. See Notes about sound
for additional information.
during the Post-Event time.
OFF = Sound off while recording
an event. See Notes about sound
for additional information.
HOURLY
REMINDER
REMINDER
Default = ON
ON = Ring every hour when an
event is stored in memory.
OFF = Do not remind patient an
event is stored in memory.
event is stored in memory.
OFF = Do not remind patient an
event is stored in memory.
PREVIEW TIME
Default = 30 sec
The number of seconds the ECG
signal is displayed for each
channel when the patient cable is
inserted.
signal is displayed for each
channel when the patient cable is
inserted.
TRANSMIT
SPEED
SPEED
Default = 1X
The speed used for transmission
of data to the receiving center.
of data to the receiving center.
PACEMAKER
DETECTION
DETECTION
Default = ON
Turn Pacemaker stimulus
detection ON/OFF.
detection ON/OFF.
ARRHYTHMIA
DETECTION
DETECTION
Default = ON
Turn Arrhythmia Detection
ON/OFF. When ON, The Brady
Rate, Tachy Rate, and Pause
Duration Threshold can be set.
ON/OFF. When ON, The Brady
Rate, Tachy Rate, and Pause
Duration Threshold can be set.
BRADY RATE
Default = 45 bpm
(Arrhythmia Detection must be
on to access this function)
TACHY RATE
Default = 160 bpm
(Arrhythmia Detection must be
on to access this function)
Continue on next page