Honeywell International Inc. REM1000R01 Manuale Utente

® U.S. Registered Trademark.
Copyright © 2011 Honeywell International Inc.
All rights reserved.

20/40/60 Minute Ventilation and Filtration Timer

1  Remove the cover.
2  Insert the CR2450 coin cell battery (included) into the 

slot at the bottom of the remote. See polarity marking 
on the remote.

3  The LED will briefly flash green.

When battery power is low, the LED will flash red.

Mounting the remote is optional.

1  Remove the front cover from the remote.
2  Use provided screws and wall anchors to fasten the 

remote to the wall.

3  Replace the cover on the remote.

1  Prepare the thermostat for RedLINK connection (see 

the thermostat or EIM instructions).

2  Press and release the CONNECT button on the 

remote. After a short delay, the LED will glow green for 15 seconds.

•  Ventilation and filtration control from any

location.

•  Works with any RedLINK® 2.0 thermostat.

•  Does not require a ventilator to boost

filtration.

M33096

M33095

69-2677EFS-03