Honeywell International Inc. THX9001R01 Manuale Utente

MCR32935

MCR32934

While the Add Device screen is displayed
on the thermostat, press and release the 
CONNECT button on each wireless device, as
described below. Accessories need to be at
least 2 feet away from the thermostat during
the linking process.

If you need to return to the "Add Device" screen to add devices later, press

MENU 

and scroll down to press

INSTALLER OPTIONS. Enter the date code (password)

when prompted. The date code is printed on the back of the thermostat; or press
MENU > EQUIPMENT STATUS to find the date code. After you enter the password,
scroll down to press

WIRELESS DEVICE MANAGER and then select ADD DEVICE.

MCR28847A

Press and release 

CONNECT. After 

a short delay the thermostat will 
display "Wireless Outdoor Sensor 
added" on the Add Device screen.

Press and release 

CONNECT. 

After a short delay, the status light 
will glow green for 15 seconds.

If the status light turns red, 
the sensor did not link with the 
thermostat.

In normal operation, this light 
remains off. If it begins flashing 
red, batteries are low (power will 
be depleted after 2-3 weeks).

Press 

DONE after all devices have been linked

When power is interrupted, the equipment and the RedLINK accessories will automatically restore 
communication after power resumes.

If you have both a wired and wireless outdoor sensor installed, the thermostat displays the reading 
from the wireless outdoor sensor.